Abstract
Abstract
Over recent decades, upgrading dikes that defend against storm surges increasing in both intensity and frequency resulting from global warming, face challenges such as environmental impact and susceptibility to brittle failure. To address this issue, the steel sheet pile can be employed to improve the dike stability due to its resilience in withstanding substantial deformation. To investigate the reinforcement mechanism of the steel sheet pile, this study conducted three wave flume tests including the dike without configuration, the dike with single sheet pile, and the dike with double sheet pile. The dike stability and pile bending moment were analyzed based on the monitoring data. The experimental results showed that the single pile significantly improved the dike stability by reducing the seepage. The maximum bending moment for the single sheet pile occurred at approximately 1/3 of the pile depth, primarily due to its proximity to the wave impact area on the dike. The double pile further enhanced the dike stability primarily through the reduction of wave scour. The maximum bending moment for the double pile occurred at a lower position (2/3 of the pile depth) and was smaller due to the external force distribution and tie rod limitation.