Author:
Nurjanah S,Adshmiraj JA,Kramadibrata MAM,Muhaemin M,Mardawati E,Herwanto T,Handarto ,Rosalinda S,Prijatna D,Saukat M,Darajat W
Abstract
Abstract
Kemiri Sunan (Reutealis trisperma) has great potential as a source of raw material for biodiesel production due to its high oil content. The oil is a non-edible oil that can be extracted using screw-press machine. In this study, a descriptive research with regression and correlation analysis was used to investigate the effect of feed material level on pressing performance and kemiri sunan’s oil quality. A variation of the feed material level (2, 4, 6, 8, and 10 kg) was fed into screw-press machine. The results showed that cylinder temperature and pressing time increased as the feed material level increased. The highest production (2.87 kg / hour) and yield (37.33%) capacity were obtained at 4 kg of the feed material level. Hence, increasing the feed material level did not affect the quality of the oil produced. Density, acid number, Free Fatty Acid (FFA), saponification number, kinematic viscosity and refractive index of oil produced ranged between 919.48-924.76 kg/m2, 30.82-47.79 mg KOH/g oil, 15.25-23.65%, 154.64 -186.84 mg KOH/g oil, 45.59-56.34 mm2/s and 0.00328-00.332 respectively.
Reference16 articles.
1. Production of Biodiesel: possibilities and challenges;Al-Zuhair;Biofuels, Bioprod. Bioref,2007
2. Effects of the Reaction Parameters and Kinetic Study for Preparation of Biodiesel from Karanza Oil;Ghosal;International Journal of Emerging Technology and Advanced Engineering,2014
3. Performance and Emission of Diesel Fuelled with Preheated Biodiesel Fuel Derived from Crude palm, Jatropha and Waste Cooling Oils;Khalid;International Journal of Automotive and Mechanical Engineering,2017
4. A Meta-Analytic Review of Life Cycle Assessment and Flow Analysis Studies of Palm Oil Biodiesel;Manik;Integrated Environmental Analysis and Management,2012
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献