Author:
Nyan Htet Lin,Aung Ko Zo,Yarovaya O V,Abaeva E A,Boldyrev V S
Abstract
Abstract
This work is devoted to the preparation of microfiltration ceramic tubular membranes based on α-Al2O3 with deposited catalytically active layers for use in wastewater treatment processes. Cobalt and manganese oxides were used as the material of the catalytically active layer; deposition was carried out using a mixture of aggregative stable aqueous dispersions of Co3O4 and MnO2 nanoparticles. According to the data of scanning electron microscopy, the thickness of the obtained deposited layers does not exceed 3 μm. X-ray fluorescence analysis confirmed the presence of Mn and Co on the surface of the samples. The resulting membranes with a mass of 10 mg of the deposited layer of the oxide mixture were tested in the methylene blue decomposition reaction in dilute aqueous solutions (1,2 mg/L). The reaction was carried out in a batch reactor at room temperature, complete discoloration of the solution was observed after 180-240 minutes.
Reference17 articles.
1. Modification of polymeric membranes with unipolar corona discharge to intensify the separation of oil-in-water emulsions;Shaikhiev;IOP Conf. Ser.: Mater. Sci. Eng.,2019
2. Effect of radiofrequency plasma treatment on the characteristics of polysulfonamide membranes and the intensity of separation of oil-in-water emulsions;Fedotova;Surf. Engin. Appl. Electrochem.,2018
3. Post-treatment of wastewater from initial detonating agents production by membranes;Khusainova,2020
4. Influence of high-frequency low-temperature plasma parameters during the processing of keratin and cellulose-containing waste of felt manufacture on the efficiency of carbon oil removal from the water surface;Altapova;Bulletin of Kazan Technological University,2017
5. Wool, and its processing waste as sorption materials. 2. Organic compounds;Shaikhiev;Bulletin of the Technological University,2018