Evaluation of gap influence on the dynamic response behavior of pump-turbine runner

Abstract

Purpose The gaps between runner and nearby structures play an important role in the dynamic response of runner, especially for pump-turbines. This paper aims to evaluate the gap influence on the added mass and dynamic stress of pump-turbine runner and provide an improved method to predict the resonance of runner. Design/methodology/approach Acoustic-structural coupling method was used to evaluate the added mass factors of a reduced scale pump-turbine with different axial and radial gap size between runner and nearby rigid walls. Improved one-way fluid-structural interaction (FSI) simulation was used to calculate the dynamic stress of the runner, which takes into account fluid added mass effect. The time-dependent hydraulic forces on the runner surfaces that were obtained from unsteady CFD simulation were transferred to the runner structure as a boundary condition, by using mesh-matching algorithm at the FSI surfaces. Findings The results show that the added mass factors increase as the gap size decreases. The axial gaps have greater influence on the added mass factors for the in-phase (IP) modes than the counter-phase (CP) and crown-dominant (CD) modes, while the CP and CD modes are very sensitive to the radial gaps. The largest added mass factor is observed in (2 + 4)ND-CP mode (resonance mode). The results reveal that the transient structural dynamic stress analysis, with the consideration of gaps and fluid added mass, can accurately predict the resonance phenomenon. Resonance curve of the pump-turbine has been obtained which agrees well with the test result. The gap fluid has great influence on the resonance condition, while for non-resonance operating points, the effect of gaps on the dynamic stress amplitude is quite small. Originality/value This paper provides an accurate method to analyze the dynamic response during runner design stage for safety assessment. The resonance curve prediction has more significance than previous methods which predict the resonance of runner by modal or harmonic analysis.