Impact of test parameters on the water vapor permeability of textiles

Abstract

PurposeUnlike other materials, textiles associate with aesthetic and mechanical properties such as flexibility and removability that allow them to be deployed or folded as required and which make them good candidates for clothing and furnishing but also, eventually, for other applications such as building. Actually, the clothing should ensure appropriate heat and mass transfers between the human body and its environment in order to maintain the thermo-physiological comfort. For that, it is important to determine water vapor permeability (WVP) of textile. Several normalized procedures with variants depending on the nature of the tested material exist to measure the WVP. One of the methods used is the “dish method” described by the British Standard (BS 7209). The purpose of this paper is to determine the influence of the test parameters on the WVP measurements.Design/methodology/approachConsequently, WVP of different textiles was measured while varying several parameters like: nature of fabrics, air layer thickness, vapor pressure gradient and air velocity.FindingsA decrease in the WVP values was observed with an increase in the air layer thickness and the number of textile layers. On the other side, an increase in the water pressure gradient induces an increase in the WVP value. Finally, it was also observed that air velocity has an impact on the WVP measurements.Originality/valueIn addition to intrinsic properties of fabrics, i.e., nature of fiber, woven structure, the influence of the several extrinsic properties, i.e., the influence of the air layer thickness, the number of textile layers, the vapor pressure gradient and the air velocity, on the WVP were investigated. Some researchers have already investigated the impact of these parameters on the WVP measurement separately. However, this study presents a difference from other studies that it takes into account the influence of the both intrinsic and extrinsic properties on WVP. In addition to these, this work combine several extrinsic properties which are presented separately during other studies. The first time, in this study the influence of the air velocity on WVP was investigated. Results on both hydrophilic and hydrophobic fabrics showed a great variation in the results when varying the location of the cups inside the climatic chamber. This is the reason why future studies look at studying more deeply the effect of air velocity on the WVP properties on different types of fabrics by connecting WVP values with air velocity values. It is also planned to make tests with the rotation device and by fixing the value of the temperature and RH. The objective will be to obtain reliable values that do not take into account the effect of air velocity.