Author:
Chu Wenmin,Huang Xiang,Li Shuanggao
Abstract
Purpose
With the improvement of modern aircraft requirements for safety, long life and economy, higher quality aircraft assembly is needed. However, due to the manufacturing and assembly errors of the posture adjustment mechanism (PAM) used in the digital assembly of aircraft large component (ALC), the posture alignment accuracy of ALC is difficult to be guaranteed, and the posture adjustment stress is easy to be generated. Aiming at these problems, this paper aims to propose a calibration method of redundant actuated parallel mechanism (RAPM) for posture adjustment.
Design/methodology/approach
First, the kinematics model of the PAM is established, and the influence of the coupling relationship between the axes of the numerical control locators (NCL) is analyzed. Second, the calibration method based on force closed-loop feedback is used to calibrate each branch chain (BC) of the PAM, and the solution of kinematic parameters is optimized by Random Sample Consensus (RANSAC). Third, the uncertainty of kinematic calibration is analyzed by Monte Carlo method. Finally, a simulated posture adjustment system was built to calibrate the kinematics parameters of PAM, and the posture adjustment experiment was carried out according to the calibration results.
Findings
The experiment results show that the proposed calibration method can significantly improve the posture adjustment accuracy and greatly reduce the posture adjustment stress.
Originality/value
In this paper, a calibration method based on force feedback is proposed to avoid the deformation of NCL and bracket caused by redundant driving during the calibration process, and RANSAC method is used to reduce the influence of large random error on the calibration accuracy.
Subject
Industrial and Manufacturing Engineering,Computer Science Applications,Control and Systems Engineering
Reference46 articles.
1. Least-squares fitting of two 3-D point sets;IEEE Transactions on Pattern Analysis and Machine Intelligence,1987
2. A method for registration of 3-D shapes;IEEE Transactions on Pattern Analysis and Machine Intelligence,1992
3. Optimization of actuating forces of redundantly actuated planar parallel manipulators;Journal of Beijing University of Technology,1997
4. Study of the antagonistic stiffness of parallel manipulators with actuation redundancy;Mechanism and Machine Theory,2004
5. Review on kinematics calibration technology of serial robots;International Journal of Precision Engineering and Manufacturing,2014
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献