Numerical analysis and structural intervention methodology for a wood floor of a medieval building

Abstract

Purpose The case-study building of this work is the Medieval Inn of Gralheira (“Pousada Medieval da Gralheira”) located in Vila Pouca de Aguiar, Portugal. This building is an example of the structures of that time, located in Trás-os-Montes, Portugal. A large amount of the built heritage suffers from advanced degradation, making the recovery, increasing the complexity of the rehabilitation and restoration intervention and implying a highly specialized interdisciplinary component. Therefore, the purpose of this paper is to carry out a study of the building in order to perform an analysis of its wood floor and assess its structural behaviour and conservation status. This work also presents some examples of intervention methods and rehabilitation techniques used to solve problems in the masonry structure and wood structures. Design/methodology/approach In this work, a numerical model of a wood pavement of a medieval building is presented, which was developed and calibrated with values obtained in an experimental campaign of wood specimens extracted from the floor structure and the deformation measured in situ. This model aims to analyse and predict the behaviour of the structure in terms of serviceability limit states. Rehabilitation and reinforcing techniques are described, for specific damages, complemented with a critical comparative analysis to define the most appropriate rehabilitation measures for each situation. Findings In this work, for the numerical model of the medieval building under consideration, the support of the beams in the walls between 50 per cent embedded and simply supported (hinge supports) was used. Since the beams have some restriction imposed by the wall, they have a delivery about 20 cm in the wall. The consideration of the delivery between beam and columns as simply supported (hinge supports) is a reasonable approximation. There is a difference between the values of deformation obtained in the numerical model and in situ due to the support conditions and also due to the consideration of the pavement loads as a distributed load, which does not correspond entirely to reality, since the pavement confers rigidity to the floor, behaving like a diaphragm. The presented intervention techniques are not applicable in all structures because each building has different characteristics, in terms of materials and construction. The pathologies occur due to many sources and each case is unique, and must be carefully studied before taking decisions about the rehabilitation methods to use. Originality/value This work presents a numerical model of wood pavement of a medieval building developed according to some experimental values obtained in an experimental campaign using wood specimens extracted from original beams and based on in situ measurements. This study is part of master thesis of Michael Andrade, an original research work.