Virtual 3D model of Canseleri building via close-range photogrammetry implementation

Abstract

Purpose The current technique used to measure construction is the conventional total station method. However, the conventional method is time-consuming and could not be used to create a photo-realistic three-dimensional (3D) model of an object. Furthermore, the Canseleri building is located at a slope. The paper aims to discuss this issue. Design/methodology/approach The aim of this study is to assess the geometric accuracy of a 3D model using unmanned aerial vehicle (UAV) images. There are two objectives in this study. The first is to construct a 3D model of the Canseleri building using UAV images. The second objective is to validate the 3D model of the Canseleri building based on actual measurements. Findings The close-range photogrammetry method, using the UAV platform, was able to produce a 3D building model. The results show that the errors between the actual measurement and the generated 3D model were less than 4 cm. The accuracy of the 3D model achieved in this study was about 0.015 m, compared to total station measurements. Originality/value Accuracy assessment was done by comparing the estimated measurement of the 3D model with the direct measurement. The differences between the measured values with actual values could be compared. Based on this study, the 3D building model gave a reliable accuracy for specific applications.