Abstract
To optimize the technological process of manufacturing copper wire coated with solder of the POIN-52 grade, the optimal modes for the tinning temperature, linear velocity, diameter of the diamond die and flux were identified. It was found that the best wire tinning process is achieved when cleaning the surface of a copper wire by the method of electrochemical degreasing. The results of the tests showed that, in terms of mechanical and electrical parameters wire meets the require-ments for electrodes in the manufacture of solar modules. The results of climatic tests of solar modules showed a high degree of reliability with a power loss of 0.86% and thermal cycling tests with a power loss of 0.4%, which is within tolerance.
Subject
Materials Chemistry,General Chemical Engineering,General Chemistry
Reference10 articles.
1. Solar Cells: Current State and Development Prospects
2. Prospects for Energy Technologies 2008. Scenarios and Strategies until 2050 [Internet]. International Energy Agency. OECD / IEA, 2008. p. 10–15 [cited 29.07.2021]. Available from: https://iea.blob.core.windows.net/assets/0e190efbdaec-4116-9ff7-ea097f649a77/etp2008.pdf
3. Measuring complex for studying cascade solar photovoltaic cells and concentrator modules on their basis
4. Semenov VL, Aleksandrov, RI, Kuzmin MV, Rogozhina LG, Ivanova KY, Patianova AO, inventors; Chuvash State University named after I. N. Ulyanov, assignee. Method for producing copper wire coated on the basis of an alloy of tin-indium. Russian Federation patent RU 2764277 C1. 2022. Russian.
5. Vinokurov EG, Margolin LN, Farafonov VV. Elektroosazhdenie kompozitsionnykh pokrytiy [Electrodeposition of composite coatings]. Izvestiya vysshikh uchebnykh zavedeniy. Seriya: Khimiya i khimicheskaya tekhnologiya. 2020;63(8):4–38. Rus-sian.