Secondary flow and turbulence in a cone-and-plate device

Abstract

The flow between a shallow rotating cone and a stationary plate has been investigated using flow visualization, hot-film heat-transfer probes, and measurements of the torque required to rotate the cone against the retardation of the viscous fluid that fills the device. Theory appropriate to these experiments is also presented.An expansion of the Navier–Stokes equations is performed for small values of the single parameter $\tilde{R} = r^2\omega\alpha^2/12\nu $. (Here r is the local radius, ω the angular velocity of the cone, α([Lt ] 1) is the angle between the cone and plate, and v is the fluid kinematic viscosity.) The measurements at low rotational speeds describe a simple linear velocity profile as predicted for the laminar flow of a Newtonian fluid. At larger rotational speeds, strong secondary flows are observed. There is agreement between the laminar theory and the measured streamline angles and shear stresses for values of $\tilde{R} < 0.5$. Turbulence is observed for $\tilde{R} \gtrsim 4$.