Author:
Ramya ,Rama Rao Thipparaju
Abstract
Owing to dynamic nature of vehicular environments, it becomes essential to achieve effective communication via vehicle-to-vehicle and infrastructure-to-vehicle. This leads to the need for an antenna system that supports multiple frequency bands, high gain, broadside radiation pattern, and circular polarization. We propose single-arm penta-band-based spiral antenna with dimensions of 51 × 35 × 1.574 mm3resonating at navigational wireless frequencies 1.2 GHz for IRNSS and 1.5 GHz for GPS; wireless communication frequencies 2.45 and 3.3 GHz and dedicated short range communication frequency 5.8 GHz. Linear taper feed has been introduced to achieve good impedance matching and the outer edge feed of the spiral on the same plane helps to achieve circular polarization. The measurement result proves the betterment in impedance of the spiral antenna that varies from 50 –55 Ω across the desired operating frequencies.
Publisher
Cambridge University Press (CUP)
Subject
Electrical and Electronic Engineering
Reference21 articles.
1. Design of a multi-band loop antenna for wireless communications: Simulation and analysis;Haj-Ahmed;J. King Saud Univ. – Eng. Sci.,2011
2. AN L-PROBE FED STACKED RECTANGULAR MICROSTRIP ANTENNA COMBINED WITH A RING ANTENNA FOR TRIPLE BAND OPERATION IN ITS
3. IEEE Standard for Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications
4. Gamage J.K. ; Engjom M. ; Jensen I.A. : Design of a low profile multi-band antenna for vehicular communication system, in IEEE 7th Eur. Conf. Antennas and Propagation (EuCAP), Gothenburg, 2013, 1273–1277.
Cited by
9 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献