Abstract
Direct numerical simulations are performed of a confined three-dimensional,
temporally developing, initially isothermal gas mixing layer with one stream
laden with
as many as 7.3×105 evaporating hydrocarbon droplets, at
moderate gas
temperature and subsonic Mach number. Complete two-way phase couplings
of mass, momentum
and energy are incorporated which are based on a thermodynamically self-consistent
specification of the vapour enthalpy, internal energy and latent heat of
vaporization.
Effects of the initial liquid mass loading ratio (ML),
initial Stokes number (St0),
initial droplet temperature and flow three-dimensionality on the mixing
layer growth
and development are discussed. The dominant parameter governing flow modulation
is found to be the liquid mass loading ratio. Variations in the initial
Stokes number
over the range 0.5[les ]St0[les ]2.0 do not cause
significant modulations of either first- or
second-order gas phase statistics. The mixing layer growth rate and kinetic
energy are
increasingly attenuated for increasing liquid loadings in the range
0[les ]ML[les ]0.35.
The laden stream becomes saturated before evaporation is completed for
all but the
smallest liquid loadings owing to: (i) latent heat effects which reduce
the gas temperature,
and (ii) build up of the evaporated vapour mass fraction. However, droplets
continue to be entrained into the layer where they evaporate owing to contact
with the
relatively higher-temperature vapour-free gas stream. The droplets within
the layer
are observed to be centrifuged out of high-vorticity regions and to migrate
towards
high-strain regions of the flow. This results in the formation of concentration
streaks
in spanwise braid regions which are wrapped around the periphery of secondary
streamwise vortices. Persistent regions of positive and negative slip velocity
and slip
temperature are identified. The velocity component variances in both the
streamwise
and spanwise directions are found to be larger for the droplets than for
the gas
phase on the unladen stream side of the layer; however, the cross-stream
velocity and
temperature variances are larger for the gas. Finally, both the mean streamwise
gas
velocity and droplet number density profiles are observed to coincide for
all ML when
the cross-stream coordinate is normalized by the instantaneous vorticity
thickness;
however, first-order thermodynamic profiles do not coincide.
Publisher
Cambridge University Press (CUP)
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics
Cited by
243 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献