Ground-Motion Model for Hard-Rock Sites by Correction of Surface Recordings (Part 2): Correction, Mixed-Effects Regressions, and Results

Abstract

ABSTRACT In the framework of site-specific seismic hazard assessment, the definition of reference motion is a crucial step. Reference motion is generally associated with hard-rock conditions, characterized by S-wave velocity exceeding 1500 m/s. However, ground motion recorded at sites with such conditions is poorly represented in existing strong-motion databases. Thus, the validity domains of most empirical ground-motion prediction equations (GMPEs) are not representative of reference rock conditions. To overcome this limitation and assess ground motion at reference conditions, the so-called “deconvolution approach” was proposed by Laurendeau et al. (2018) to correct surface recordings from theoretical 1DSH site response before GMPE developments. With the same purpose, in this article, we propose to apply the deconvolution approach using empirical site-response estimates as an alternative to theoretical ones. Using the Kiban–Kyoshin network (KiK-net) data, we estimate empirical site responses at KiK-net stations using generalized inversion techniques in addition to those from 1DSH numerical simulations, as presented in the companion article. Finally, a reference ground-motion model (RGMM) is determined based on empirically deconvolved ground motions. The advantage of using empirical rather than 1DSH site responses in the deconvolution approach is that in the former case the RGMM can be built based on records from an extensive set of sites, whereas the latter case is restricted to well-characterized sites with dominant 1D behavior. This makes the proposed approach easily exportable to different regions of the world, where precise site characterizations are not systematically available, and the knowledge of site behavior is limited.