Affiliation:
1. School of Civil Engineering, Malayer University 1 , Daneshjoo Blvd., Malayer65719-95863, Iran (Corresponding author), e-mail: elyasi.mr@gmail.com , ORCID link for author moved to before name tags https://orcid.org/0000-0003-0871-7973
2. School of Civil Engineering, Malayer University 2 , Daneshjoo Blvd., Malayer65719-95863, Iran , https://orcid.org/0000-0002-7288-5456
Abstract
Abstract
In general, the basis of any type of management decision-making system is a correct evaluation of the current situation, future prediction, and finally optimal decision-making. There are various field methods for road pavement evaluation, among which are destructive and nondestructive methods. One of the nondestructive testing methods is dynamic cone penetrometer (DCP) testing. The main objective of this study is to investigate the feasibility of using DCP to control the quality of pavement layers and estimate parameters such as California bearing ratio (CBR) and compaction ratio. For this purpose, DCP, CBR tests, and determination of density percentage have been used as parameters used to control the quality of pavement layers. The dynamic resistance meter or DCP is a device that is used to quickly measure the resistance of different pavement layers. This device causes a small destruction on the surface. Hence, it is also called nondestructive testing. However, to use DCP, it is necessary to measure its results with the results of prevalent and widely used tests such as CBR and to examine their relationships. In this research, the DCP, CBR, density, sieve analysis, moisture content, and Atterberg limit tests were performed on two locations (a highway under construction and a landscaping project). Then, the results of the DCP test with CBR and soil compaction ratio (R) in two different locations were investigated and the relationships between these parameters were determined. The results showed that there is a good relationship statistically between DCP and CBR parameters in both locations. Also, for the first time, a very good correlation between the R parameter and the results of the dynamic penetrometer cone test was obtained. The observations represented that the correlation coefficients are higher than 0.9 in the highway location, which had well-graded soil in comparison with the landscaping project.
Reference30 articles.
1. Prediction of CBR Using Dynamic Cone Penetrometer Index;Sagar;Materials Today: Proceedings,2022
2. Correlation between California Bearing Ratio (CBR) and Dynamic Cone Penetrometer (DCP) for Soil from Sincelejo City in Colombia;Wilches;International Journal of Applied Engineering Research,2018
3. Estimation of Field CBR from DCP for Subgrade Soils;Meshram;Arabian Journal of Geosciences,2022
4. Development of Correlation between Soaked CBR and In-Situ CBR Determined by DCP for Soil in the Southern Province of Rwanda;Ntirenganya;International Journal of Scientific Research and Management,2020
5. CBR Value Estimation Using Dynamic Cone Penetrometer—A Case Study of Brazil’s Midwest Federal Highway;Monteiro;The Electronic Journal of Geotechnical Engineering,2016