Author:
Helis Rima,Mansouri Tarek,Abbeche Khelifa
Abstract
This study used finite element analysis to investigate the influence of using two reinforcing systems, the geogrid and the grid anchor, on the bearing capacity of a circular footing resting on sand. The parameters studied were the effect of the number of reinforcement layers (N), the depth ratio of the topmost layer of reinforcement (u/d), the vertical spacing ratio between consecutive layers (h/d), and the effect of reinforcement length (L). The results showed that the reinforcement layout had a very significant effect on the behavior of the reinforced sand foundation. The maximum bearing capacity for single-layer inclusion was obtained when reinforcement was placed at a depth of u/d=0.42. Bearing capacity was also found to improve when increasing the number of reinforcement layers from 1 to 3. Additionally, the analysis showed that the sand reinforced by grid anchors performed better than that reinforced by geogrid. Finally, an improvement in load capacity was obtained by increasing the length of the inclusions, and the optimal length of the reinforcements was determined at 5d for both inclusions.
Publisher
Engineering, Technology & Applied Science Research
Reference39 articles.
1. J. Binquet and K. L. Lee, "Bearing Capacity Tests on Reinforced Earth Slabs," Journal of the Geotechnical Engineering Division, vol. 101, no. 12, pp. 1241–1255, Dec. 1975.
2. J. Binquet and K. L. Lee, "Bearing Capacity Analysis of Reinforced Earth Slabs," Journal of the Geotechnical Engineering Division, vol. 101, no. 12, pp. 1257–1276, Dec. 1975.
3. R. J. Fragaszy and E. Lawton, "Bearing Capacity of Reinforced Sand Subgrades," Journal of Geotechnical Engineering, vol. 110, no. 10, pp. 1500–1507, Oct. 1984.
4. C. C. Huang and F. Tatsuoka, "Prediction of bearing capacity in level sandy ground reinforced with strip reinforcement," presented at the International geotechnical symposium on theory and practice of earth reinforcement, Fukuoka, Japan, 1988, pp. 191–196.
5. C. C. Huang and F. Tatsuoka, "Bearing capacity of reinforced horizontal sandy ground," Geotextiles and Geomembranes, vol. 9, no. 1, pp. 51–82, Jan. 1990.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献