A perspective on welding technology challenges in the nuclear sector-Reference-Cited by-同舟云学术

A perspective on welding technology challenges in the nuclear sector

Published:2022-03-09 Issue:4 Volume:27 Page:309-317
ISSN:1362-1718
Container-title:Science and Technology of Welding and Joining
language:en
Short-container-title:Science and Technology of Welding and Joining

Author:

Francis J. A.¹^ORCID

Affiliation:

1. School of Engineering, The University of Manchester, Manchester, UK

Publisher

Informa UK Limited

Subject

Condensed Matter Physics,General Materials Science

Link

https://www.tandfonline.com/doi/pdf/10.1080/13621718.2022.2047407

Reference53 articles.

1. Laser beam welding under vacuum of high grade materials

2. Laser Welding under Vacuum: A Review

3. Program on technology innovation: small modular reactor vessel manufacture and fabrication, phase 1 – progress (Year 3). Palo Alto (CA): Electric Power Research Institute; 2021. Report No. 3002021037.

4. Thermal cycle-dependent metallurgical variations and their effects on the through-thickness mechanical properties in thick section narrow-gap welds

5. Residual stresses in arc and electron-beam welds in 130 mm thick SA508 steel: Part 1 - Manufacture

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Eliminating the soft zone for grade 91 steel weldment via enhancing prior austenite grain size of the intercritical heat-affected zone;Materials Characterization;2024-10

2. Nuclear Reactor Pressure Vessel Welds: A Critical and Historical Review of Microstructures, Mechanical Properties, Irradiation Effects, and Future Opportunities;Materials & Design;2024-08

3. Welding Practices in Industry 5.0;Automation in Welding Industry;2024-02-05

4. Review on High-Energy Beam Based Processing Technologies for Fabrication of Small Modular Reactor;Journal of Welding and Joining;2023-12-31

5. Hybrid Welding Process in Lieu of Conventional Practices for Fabrication of Austenitic Stainless Steel AISI 304L Components in Nuclear Facility;Journal of Materials Engineering and Performance;2022-11-23