Preparation of Ceramic Foam Filters With a Lithium-Containing Surface

Abstract

AbstractHydrogen in aluminum causes the formation of detrimental hydrogen porosity in castings. In order to reduce the formation of hydrogen pores, an approach was targeted using lithium as target for hydrogen. This approach utilizes the affinity of lithium for hydrogen, whereby spodumene (a lithium aluminum silicate) and lithium aluminate were used as lithium providers. Within the scope of this study, the preparation of ceramic foam filters with a coating of lithium-containing raw materials (spodumene) was investigated. Those investigations revealed that the spodumene coating has a detrimental influence on the bending strength of the foams when a certain level of spodumene is exceeded. This observation might be explainable by the intrusion of the spodumene into the alumina matrix of the skeleton foam. Two wetting tests at different temperatures were conducted, verifying the significant influence of the temperature on the reaction between the spodumene and AlSi7Mg. Furthermore, test filters coated with raw materials exhibiting different amounts of lithium were conducted. The hydrogen pores were evaluated by light microscopy and computed tomography. The analyzed pore size distribution in the aluminum did not elucidate the proximate influence of the lithium-coating on the ceramic foam filter on the hydrogen porosity in the aluminum.