Synthesis, Properties, and Degradation of Poly(butylene succinate-co-sebacicate-co-salicylicate) Copolyesters

Abstract

AbstractSince monomers in backbone of poly(butylene succinate-co-adipate) (PBSA) are not entirely derived from bio-based sources, limiting its application in the face of increasingly stringent environmental policies. In this study, a novel full bio-based biodegradable random copolyester poly(butylene succinate-co-sebacicate-co-salicylicate) was successfully synthesized. Detailed investigations were conducted on the structural, mechanical, and degradation characteristics resulting from the introduction of salicylicate and sebacicate units. Introduction of salicylicate units effectively enhanced the mechanical performance. In comparison to PBSA, the tensile modulus of copolymer increased by 20.2% with 10% salicylic acid. Introduction of sebacicate units significantly altered the crystalline structure of copolymer and promote the degradation efficiency. Considering both mechanical strength and degradation efficiency, the copolyester with 2% salicylic acid and 20% sebacic acid was found to meet practical application requirements. Relative to PBSA, this copolymer demonstrated a 13.7% increase in tensile modulus and a remarkable 143.1% improvement in degradation efficiency. Importantly, this study focused on the effect of the bio-based rigid monomer salicylic acid and the soft monomer sebacic acid on the degradability of biodegradable polymers. The insights gained provide valuable guidance for tailoring the synthesis of degradable plastics to meet diverse degradation cycle requirements.