Author:
Gao Siyang,Xue Weihai,Duan Deli,Li Shu
Abstract
Abstract
The tribological behaviors of two types of seal coatings, nickel–graphite and aluminum–hexagon-boron nitride (Ni–Cg and Al–hBN, respectively) versus a Ti–6Al–4V blade used in turbofan engines were investigated using a high-speed rubbing test. The wear status and damage mechanism of the friction couples were studied and the abradability of the seal coatings was evaluated. By analysis of the coating properties and damage mechanism of the seal couple, the friction heat effect was identified as the key factor influencing blade wear forms as well as coating abradability. A one-dimensional heat conduction model was established to estimate the effect of increasing temperature on the friction interface. The results indicated that in the Ni–Cg and Ti–6Al–4V seal couple, the temperature rising rate (TRR) of the Ti–6Al–4V blade was faster than that of the Ni–Cg coating, and so the Ti–6Al–4V blade softened earlier than the Ni–Cg coating, causing the blade to suffer severe wear. In the Al–hBN and Ti–6Al–4V seal couple, the TRR of the Ti–6Al–4V blade was slower than that of the Al–hBN coating, and so the Al–hBN coating softened first; thus, blade damage was reduced or even replaced by coating adhesion. The square root ratio of thermal diffusivity between the blade and the coating could be taken as an indicator of the ratio of TRR between the blade and coating to predict blade wear status as well as damage mechanism. The results of the model agreed well with the experiment results of the two seal couples used in this study.
Publisher
Springer Science and Business Media LLC
Subject
Surfaces, Coatings and Films,Mechanical Engineering
Reference26 articles.
1. Bill R C, Ludwig L P. Wear of seal materials used in aircraft propulsion systems. Wear
59: 165–189 1980
2. Hajmrle K, Fiala P, Chilkowich A P. Abradable seals for gas turbines and other rotary equipment. In Proceedings of ASME Turbo Expo 2004, 2004: 14–17
3. Chupp R E, Hendricks R C, Steinetz B M. Sealing in turbomachinery. Journal of Propulsion and Power
22(2): 313–349 2006
4. Ludwig L P, Bill R C. Gas Path Sealing in Turbine Engines. Tribol Trans
23(1): 1–22 1980
5. Bounazef M, Guessasma S, Ait Saadi B, Aourage H. Seal creation of abradable material NiCrAl-boron nitride-polyester. In Proceedings of the Third International Conference on Advances in Mechanical Engineering and Mechanics, Hammamet, Tunisie, 2006: 17–19
Cited by
20 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献