Abstract
AbstractsA reasonable solution, to deal with oil field water problem, is to minimize the amount of water associated with oil production using effective completion lengths. This work presents an effective method to optimize wells’ completion lengths in an oil reservoir with a strong aquifer. The suggested technique is formulated as a constrained optimization problem that defines a NPV objective function and a set of existing field/facility constraints. An effective algorithm translates the completion lengths to connections number in the dynamic simulation model. In this approach, a genetic algorithm (GA), an adaptive version of simulated annealing (ASA) and a particle swarm optimization (PSO) hybridized with polytope technique are applied to maximize NPV. A comparison is given for their performances in a strong water-drive reservoir where the combinatorial effects of wells’ completion lengths (decision variables) should be addressed. Optimizing the lengths of completions leads to an increased production period, total oil production, retarding water breakthrough, reducing total water production, and finally increasing ultimate recovery. The results showed that total oil production by GA, ASA and PSO algorithm is increased by 11.0%, 2.40% and 2.22%, respectively, related to the initial case. Total water productions are decreased by GA, 9.82%, by ASA 2.11%, and by PSO 1.82% relative to the initial schedule. The best performance belongs to the GA algorithm. Moreover, the average watercut of all wells is decreased through the optimization process. Besides, based on the numerical simulation, closing the worst connections with high watercut decreases total water production, and improves oil recovery, maximum well productivity, and NPV (oil–water ratio is increased 18.2%). Most connections are placed in the layers where water coning can occur later (considering near-well-bore permeability) and slightly far from full water zone.
Publisher
Springer Science and Business Media LLC
Subject
General Energy,Geotechnical Engineering and Engineering Geology
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献