Petrophysical characterization of the heterogeneous shale-rich oil reservoirs: a case study of the Cenomanian Clastics, Abu Sennan Concession, North Western Desert of Egypt

Abstract

AbstractShale-rich reservoirs present a long-standing challenge for reservoir geologists because the clay minerals often induce a large-scale heterogeneity in the reservoir pore system. This work aims to understand the impact of clay distribution and mineralogy which would enhance the predictability of the best reservoir facies. We integrate seismic, well-log datasets to investigate the petrophysical characteristics of the clay-rich Cenomanian Clastics in the GPY oil field, north Western Desert of Egypt. These Clastics comprise the sandstone intervals which are the most prolific hydrocarbon reservoirs. Seismic data were used to interpret the main structural patterns as well as the different seismic facies. The well log data were utilized to interpret the lithologic variations and the type of clays in the reservoir as well as the different petrophysical parameters. Based on variations in their lithological and petrophysical characteristics, the Bahariya sandstones were sub-divided into three different rock units: Bahariya-3 (B-3), Bahariya-2 (B-2), and Bahariya-1 (B-1), separated by thick laminated clay intervals. AR/G Member is dominated by clays with relatively lower reservoir quality. Spectral gamma ray log values reveal that smectite is the dominant clay mineral in all the studied intervals. Laminated clays are dominant in B-1 and B-2 units, whereas, B-3 unit and Abu Roash G Member are enriched in structural clays. The quartzose sand content decreases from B-3 to AR/G and clay content increases from B-3 to AR/G. Therefore, the best reservoir facies and fluid flow conduits with best pore system characteristics are hosted in B-3 and the smectite clay streaks act as a good seal for hydrocarbons in the quartzose sandstone pay zone.