Mechanical and tribo-metallurgical behavior of 17-4 precipitation hardening stainless steel affected by severe cold plastic deformation: a comprehensive review article

Abstract

AbstractThis article comprehensively reviews the mechanical properties and tribo-metallurgical behavior of 17-4 precipitation hardening stainless steel (17-4PH SS) during and after cold plastic deformation. Referring to the scientific literature, stainless steels are one of the few types of ferrous alloys which could be appropriately set up through cold working processes in the forms of sheets or other shapes. Likewise, some other metal alloys such as mild low-carbon-based steels, copper and its alloys, aluminum alloys, and some others are the few types of metal alloys which have this capability. On the other hand, in engineering applications, there are several types of mechanical failures, which must be taken into account to investigate the mechanical behavior and tribo-metallurgical properties of any targeted materials. For example, corrosion resistance, wear resistance, and fatigue failure are investigated according to the microstructural studies, comprising of the grain size, grain boundaries, orientations, dislocations, and so on. Based on the published results, focusing on 17-4PH SS, one of the most main effective factors on mechanical and tribo-metallurgical performance is the grain size. Also, the favorable balance of two mechanical properties of strength and ductility has been reported as a dilemma in the materials science, and the problem delineates upon the limitations of numerous structural materials potentials. Following the failure analysis of the materials, in order to diminish the damages caused by fretting fatigue some methods such as ultrasonic processes are applied for the treatment of 17-4PH SS via changing the microstructure, residual stress, and other parameters. Also, through the other cold deformation technologies, the nanostructured surface layer with highly upgraded mechanical properties of several ultrasonic surface rolling process-treated 17-4PH SS has been obtained. To this end, such cold working processes on 17-4PH SS and their subsequent results are elaborated in this review paper. Graphical abstract