Numerical investigation of the influence of casting techniques on fiber orientation distribution in ECC

Abstract

AbstractEngineered cementitious composites (ECC), also known as bendable concrete, were developed based on engineering the interactions between fibers and cementitious matrix. The orientation of fibers, in this regard, is one of the major factors influencing the ductile behavior of this material. In this study, fiber orientation distributions in ECC beams influenced by different casting techniques are evaluated via numerical modeling of the casting process. Two casting directions and two casting positions of the funnel outlet with beam specimens are modeled using a particle-based smoothed particle hydrodynamics (SPH) method. In this SPH approach, fresh mortar and fiber are discretized by separated mortar and fiber particles, which smoothly interact in the computational domain of SPH. The movement of fiber particles is monitored during the casting simulation. Then, the fiber orientations at different sections of specimens are determined after the fresh ECC stops flowing in the formwork. The simulation results show a significant impact of the casting direction on fiber orientation distributions along the longitudinal wall of beams, which eventually influence the flexural strength of beams. In addition, casting positions show negligible influences on the orientation distribution of fibers in the short ECC beam, except under the pouring position.