Prediction of mechanical properties and hardness of friction stir welding of Al 5083/pure Cu using ANN, ICA and PSO model

Abstract

AbstractThe effect of parameters involved in prediction of mechanical properties of Friction Stir Welding have been investigated in this study through modeling. For this purpose, the friction stir welding on both sheets of 5083 Aluminum (Al5083) and pure Copper (Cu) was experimentally conducted at first level. Three factors of Rotation Speed (RPM), Traverse Speed (mm/min) and the Tool’s pin angle was examined. During the tentative test, many experiments were not satisfactorily performed. Thanks to a more rigorous study hypothesis, proper samples were obtained by changing the geometry of different tools. In order to overcome the softness of aluminum sheets and the rise of shoulder diameter, and also to avoid the vertical instability of the sheet, shortening the pin’s length was suggested. In this paper, the Full Factorial method has been employed to evaluate the result of Artificial Neural Networks (ANN), Imperialist Competitive Algorithm, Particle Swarm Optimization, and also the effects of input parameters of the process on output parameters. Moreover, Al5083 and Cu joining sheets were analyzed. Micro-hardness and tensile tests have been based on the process’ input parameters to obtain mechanical properties. The function of ANN model demonstrates that it can estimate the number of mechanical properties with an adequate precision. Using the evaluation factors of mechanical properties and micro-hardness and also a R2 ~ 0.943 analysis, the optimum parameters of Al5083 and Cu joining sheets can be anticipated. The rotation speed of 1150 rpm, traverse speed of 40 mm/min, and pin angle of 2° are the optimum conditions based on the average review of analyses. These optimum conditions led to improve the maximum tensile force up to 15 ~ 21%.