Electro-generating Cu2+ ions based on electrochemically modified CPE for the determination of malathion pesticide using valid SW-ASV method

Abstract

AbstractThis work investigates the validation of the SW-ASV method for the determination of malathion organophosphorus pesticide based on an electrochemically modified (CPE) carbon paste electrode with copper metal. The surface of the modified CPE was constructed by electrodepositing the copper layer at the accumulation step in 1-mM CuSO4.5H2O, PBS at pH 6.6, E accumulation: − 0.8 V, and Taccumulation 240 s. The determining step was performed by adding different concentrations of malathion pesticide and applying the potential toward more positive potential at (− 0.8–+ 1.4 V) to enhance the oxidation of Cu0 metal. It was noticed that the malathion concentration gradient enhances the oxidation peak current of copper at + 0.03 V gradually. SW-ASV method validation was performed at a linearity range confined in (1–10 µM). An analytical curve was constructed and R2 was equal to 0.99995 with good fitted linear relationship. LOD and LOQ were calculated to be 0.0247 and 0.08236 µM, respectively. ANOVA for two sets of measurements using the standard gas chromatographic method and the suggested SW-ASV method was demonstrated via the calculations of F-value and t-value. F and t-values were calculated to be 1.698 and 0.289, respectively, which did not exceed the tabulated F and t-values resulting in the great similarity of results and ensuring the reliability of the suggested test method. This valid SW-ASV method was used to perform the routine analysis of the 95% technical grade and the pesticide formulation 57% emulsion concentrate of the malathion. Valid results were achieved with satisfactory limits of accuracy and precision. Graphical abstract